Divot Bare Fibre Adapter
Click to enlarge
The Divot™ Bare Fibre Adapter makes testing easy. This alignment device is designed to quickly connect to unterminated (bare fibre) for testing, servicing or any other communication requirements.
The Divot™ device is ready to use right out of the box. All you have to do is connect the patchcord to your test equipment and insert the bare fibre into the end of the Divot™ module. The Divot system uses replaceable index matching gel cartridges which result in low loss, low reflection connections.
The Divot components (Divot module, patch lead(s), 2x gel cartridges and cleaning wires) are all supplied in a hard plastic protection carry case.
Features & Benefits
| Ready to use straight out of the box |
| Quick and simple to use |
| Use with cleaved or non cleaved bare fibre ends |
| Replaceable index matching gel cartridges |
| No tooling or other consumables required |
| Insertion loss of <0.5db on cleaved fibre |
| Re–useable |
| Easily disassembled for cleaning |
Applications
| Testing fibre on the drum |
| Testing non-terminated fibre both pre and post installation |
| Temporary connection to test equipment or dark fibre |
| Commissioning of communications equipment |
| Pigtail or patchcord checking |
Options
Modes |
| Single mode 9/125µm |
| Multimode OM1 62.5/125µm |
| Multimode OM2/3 50/125µm |
| Combined single mode and multimode OM1 |
Connector Styles |
| FC, ST, SC, FC/APC, SC/APC, LC |
Accessories |
| Index matching gel replacement cartridges |
| Clean-out wire |
| Replacement patchcord cable |
Specifications
| Fibre Types | Single mode 9/125um, Multimode 62.5/125um or Multimode 50/125µm |
| Cable length | 1 Metre |
| Number of insertions (Typ) | 1000 min. (500 min. per cartridge, 2 cartridges included) |
| Insertion loss (Typical) | <0.5 dB (with cleaved fibre. uncleaved fibre <0.8dB) |
| Back Reflection (Typical) | <45 dB |
| Case Dimensions | 6.50" [L] x 4.50" [W] x 1.50" [H] |
| Operating temp. | 10° to 30° C |
| Weight | 6 oz. |
